Machine tap M DIN 371 HSS Co 5-VAP
metric DIN ISO 13
Machine taps with reinforced shank and 35° right hand spiral flutes for bottoming. The machine tap consists of cobalt alloyed and vaporised heavy duty high speed steel. For bottoming threads in unalloyed and alloyed steels up to a strength of 1000 N/mm², stainless steel. The thread is cut in one operation. By «vaporisation» is meant the evaporation of a non metallic oxide film. Vaporisation acts as a separating layer and reduces the occurrence of cold welding. In cold welding there are workpiece chips that build up on the flanks of the tap and damage the finished thread. Consequences of cold welding are torn and dirty flanks. VAP improves the adhesion of lubricants to the tool surface.
Tekniske data:
| Kode | R234020VA |
|---|---|
| EAN-kode | |
| Artikkel nr. | |
| Nominal thread size | M2 |
| Pitch | 0,40 mm |
| Total length L1 | 45,0 mm |
| Thread length L2 | 8,0 mm |
| Thread core hole Ø1 | 1,60 mm |
| Shank Ø | 2,8 mm |
| Packing unit | 1 pcs |
| Produkt | Nominal thread size | Pitch | Total length L1 | Thread length L2 | Thread core hole Ø1 | Shank Ø | Packing unit | Lager | Pris | Kjøp |
|---|---|---|---|---|---|---|---|---|---|---|
| R234020VA | M2 | 0,40 mm | 45,0 mm | 8,0 mm | 1,60 mm | 2,8 mm | 1 pcs | 3 | Logg inn for å se priser | |
| R234040VA | M4 | 0,70 mm | 63,0 mm | 13,0 mm | 3,30 mm | 4,5 mm | 1 pcs | 3 | Logg inn for å se priser | |
| R234060VA | M6 | 1,00 mm | 80,0 mm | 19,0 mm | 5,00 mm | 6,0 mm | 1 pcs | 10 | Logg inn for å se priser |
