Core drill HSS-TiAlN with weldon shank (3/4″)

Cutting depth: 30 mm – Core drills made of heavy-duty high speed steel with titanium aluminium nitride coating.
The TiAIN wear-resistant coating increases the surface hardness of the tool to approx. 3,000 HV / micro-hardness and the heat resistance to 900° C. It is characterised by high tenacity plus high thermal and chemical stability and helps to achieve better tool life and cutting values. Suitable for dry finishing due to TiAIN coating. Especially suitable for working with unalloyed and alloyed steel (up to a strength of 1200 N/mm²), high-alloyed chromium steel such as stainless and acidresistant steel, as well as cast iron and tough brass.
Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.
+ Optimised cutting edge geometry for increased cutting performances and reduced cutting forces.
+ The effective cutting angles are designed for universal use in various sorts of steel.
+ Improved removal of chips thanks to U-shaped recesses. The specific geometry of the recess reduces the thermal load on the HSS core drill as the
heat created in cutting is removed with the chips to a very great extent.
+ Reduction of the friction between the HSS core drill and the workpiece thanks to optimised spiral-shaped guide chamfers.
For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303 / 108 315 / 108 316, with RUKO EasyLock no. 108 312 / 108 313 / 108 314 or a weldon direct shank such as the RUKO magnetic-stand RS5e / RS10 drill.

Tekniske data: