Hopp til innhold
✓ Verktøy med fokus på kvalitet
  • Merker
  • Aktuelt
  • Om oss
  • Min konto
  • Butikk
  • Handlekurv
  • Kasse
✓ Verktøy med fokus på kvalitet
  • Logg inn
  • Bli kunde
Oulie-Hansen AS Oulie-Hansen AS
Logg inn / Registrer
Logg innBli kunde?

Mistet passordet ditt?
Meny
Oulie-Hansen AS Oulie-Hansen AS
  • Butikk
  • Håndverktøy
  • Spennverktøy
  • Skjærverktøy
  • Kampanjer
  • Aktuelt
  • Aluca bilinnredning
Hjem › Butikk › Skjærverktøy › Core drills program › Core drills › Core drill Tecrona coated with tungsten-carbide and Quick IN-shank
Venter på produktbilde
Ruko

Core drill Tecrona coated with tungsten-carbide and Quick IN-shank


Ø 41,0 mm, cutting depth 50 mm including Quick IN-adapter No. 108 111. – Core drills with tungsten carbide cutters + Tecrona coating.
Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.
Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.
For use in magnetic-stand and column drilling machines in connection with Quick IN-adapter as the Fein KBM 32 Q.
Ø 12,0 mm up to Ø 32,0 mm with fixed shank.
Ø 33,0 mm up to Ø 80,0 mm including Quick IN-adapter No. 108 111.
Advantages of the Tecrona coating
The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C.
The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.

Tekniske data:

Kode R1081112C
EAN-kode 4007140314857
Artikkel nr. 1081112C
Diameter 12,0 mm
Core drill Core drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.
Twist drills Twist drills have to machine the entire diameter of the hole. This calls for considerable downward pressure and high driving power.
Weight 0,084 kg
Cutting edges Tungsten carbide + Tecrona coating
Adapter Quick IN-shank 18 mm
Machine With Quick IN-adapter
Cutting direction Right-hand cutting
Cutting depth 50,0 mm

"(Påkrevd)" indicates required fields

Forespørsel: Core drill Tecrona coated with tungsten-carbide and Quick IN-shank

Hidden

Du kan også ringe oss på telefon 22 75 38 00.

Dette feltet er for valideringsformål og skal stå uendret.
ProduktDiameterCore drillWeightCutting edgesAdapterMachineCutting directionCutting depthLagerPrisKjøp
R1081112C12,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,084 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081113C13,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,086 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081114C14,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,090 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081115C15,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,092 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081116C16,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,094 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081117C17,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,097 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081118C18,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,118 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081119C19,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,110 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081120C20,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,118 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081121C21,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,120 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081122C22,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,122 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081123C23,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,124 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081124C24,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,124 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081125C25,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,126 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081126C26,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,126 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081127C27,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,131 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081128C28,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,135 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081129C29,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,135 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081130C30,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,145 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081131C31,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,145 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081132C32,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,150 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081133C33,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,255 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081134C34,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,260 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081135C35,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,260 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081136C36,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,270 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081137C37,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,300 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081138C38,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,305 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081139C39,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,310 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081140C40,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,310 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081141C41,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,325 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081142C42,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,325 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081143C43,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,330 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081144C44,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,385 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081145C45,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,385 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081146C46,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,390 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081147C47,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,395 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081148C48,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,405 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081149C49,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,410 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081150C50,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,420 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081151C51,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,425 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081152C52,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,430 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081153C53,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,440 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081154C54,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,445 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081155C55,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,445 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081160C60,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,465 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081161C61,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,470 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081163C63,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,475 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081165C65,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,480 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081168C68,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,490 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081170C70,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,505 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081171C71,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,505 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081175C75,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,570 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser
R1081180C80,0 mmCore drills cut up to ten timesfaster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.0,615 kgTungsten carbide + Tecrona coatingQuick IN-shank 18 mmWith Quick IN-adapterRight-hand cutting50,0 mmLogg inn for å se priser

Relaterte produkter

Hurtigvisning
Close

T-shank style jig-saw blade 8018 HCS

Logg inn for å se priser
Hurtigvisning
Close

Reciprocating blade 8903 HCS

Logg inn for å se priser
Hurtigvisning
Close

Machine tap M DIN 371 HSS Co 5

Logg inn for å se priser
Hurtigvisning
Close

Tube and sheet drill-set HSS, ground in steel case

Logg inn for å se priser
Hurtigvisning
Close

Machine tap M DIN 371 HSS-TiN

Logg inn for å se priser
Hurtigvisning
Close

Machine tap M DIN 376 HSS Co 5

Logg inn for å se priser

Rask levering
1-3 virkedager

Lang erfaring
Vi har lang erfaring i bransjen og kan gi deg gode råd
Fokus på kvalitet
Vi leverer verktøy fra produsenter hvor kun det beste er godt nok
Oulie-Hansen - til forsiden

Kontakt oss

Ravnåsveien 3
1254 Oslo

Telefon: 22 75 38 00

Epost: firmapost@oulie-hansen.no

Sosiale medier

Vises ikke brukes for å kopiere kode til ovenstående

Personvern og informasjonskapsler
Levert av: CoreTrek AS | CMS: Wordpress
  • Butikk
  • Håndverktøy
  • Spennverktøy
  • Skjærverktøy
  • Kampanjer
  • Aktuelt
  • Aluca bilinnredning
Handlekurv
lukk