Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4″)
Ø 17 mm. Cutting depth: 50 mm – Core drills with tungsten carbide cutters + Tecrona coating.
Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.
Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.
For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303 / 108 315 / 108 316, with RUKO EasyLock no. 108 312 / 108 313 / 108 314 or a weldon direct shank such as the RUKO magnetic-stand RS 10 / RS20 / RS25e / RS30e / RS40e drill.
Advantages of the Tecrona coating
The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C.
The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.
Tekniske data:
| Kode | R108712C |
|---|---|
| EAN-kode | 4007140314437 |
| Artikkel nr. | 108712C |
| Diameter | 12,0 mm |
| Core drills | Core drills cut up to ten times faster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life. |
| Twist drills | Twist drills have to machine the entire diameter of the hole. This calls for considerfromle downward pressure and high driving power. |
| Packing unit | 1 pcs |
| Weight | 0,108 kg |
| Cutting edges | Tungsten carbide + Tecrona coating |
| Cutting depth | 50 mm |
| Adapter | Weldon shank (3/4") 19 mm |
| Machine no. | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e |
| Cutting direction | Right-hand cutting |
"(Påkrevd)" indicates required fields
| Produkt | Diameter | Packing unit | Weight | Cutting edges | Cutting depth | Adapter | Machine no. | Cutting direction | Lager | Pris | Kjøp |
|---|---|---|---|---|---|---|---|---|---|---|---|
| R108712C | 12,0 mm | 1 pcs | 0,108 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108713C | 13,0 mm | 1 pcs | 0,108 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108714C | 14,0 mm | 1 pcs | 0,108 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108715C | 15,0 mm | 1 pcs | 0,108 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108716C | 16,0 mm | 1 pcs | 0,108 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108717C | 17,0 mm | 1 pcs | 0,108 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108718C | 18,0 mm | 1 pcs | 0,108 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108719C | 19,0 mm | 1 pcs | 0,11 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108720C | 20,0 mm | 1 pcs | 0,118 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108721C | 21,0 mm | 1 pcs | 0,12 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108722C | 22,0 mm | 1 pcs | 0,122 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108723C | 23,0 mm | 1 pcs | 0,124 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108724C | 24,0 mm | 1 pcs | 0,124 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108725C | 25,0 mm | 1 pcs | 0,126 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108726C | 26,0 mm | 1 pcs | 0,126 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108727C | 27,0 mm | 1 pcs | 0,131 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108728C | 28,0 mm | 1 pcs | 0,135 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108729C | 29,0 mm | 1 pcs | 0,135 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108730C | 30,0 mm | 1 pcs | 0,145 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108731C | 31,0 mm | 1 pcs | 0,145 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108732C | 32,0 mm | 1 pcs | 0,15 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108733C | 33,0 mm | 1 pcs | 0,155 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108734C | 34,0 mm | 1 pcs | 0,16 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108735C | 35,0 mm | 1 pcs | 0,165 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser | ||
| R108736C | 36,0 mm | 1 pcs | 0,17 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108737C | 37,0 mm | 1 pcs | 0,2 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108738C | 38,0 mm | 1 pcs | 0,205 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108739C | 39,0 mm | 1 pcs | 0,21 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108740C | 40,0 mm | 1 pcs | 0,21 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108741C | 41,0 mm | 1 pcs | 0,215 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108742C | 42,0 mm | 1 pcs | 0,225 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108743C | 43,0 mm | 1 pcs | 0,23 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108744C | 44,0 mm | 1 pcs | 0,285 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108745C | 45,0 mm | 1 pcs | 0,285 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108746C | 46,0 mm | 1 pcs | 0,29 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108747C | 47,0 mm | 1 pcs | 0,295 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108748C | 48,0 mm | 1 pcs | 0,3 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108749C | 49,0 mm | 1 pcs | 0,31 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS 10 / RS20 / RS25e / RS30e / RS40e | Right-hand cutting | Logg inn for å se priser | ||
| R108750C | 50,0 mm | 1 pcs | 0,325 kg | Tungsten carbide + Tecrona coating | 50 mm | Weldon shank (3/4") 19 mm | RS25e / RS40e / RS125e / RS126e / RS140e | Right-hand cutting | Logg inn for å se priser |
