Hopp til innhold
✓ Verktøy med fokus på kvalitet
  • Merker
  • Aktuelt
  • Om oss
  • Min konto
  • Butikk
  • Handlekurv
  • Kasse
✓ Verktøy med fokus på kvalitet
  • Logg inn
  • Bli kunde
Oulie-Hansen AS Oulie-Hansen AS
Logg inn / Registrer
Logg innBli kunde?

Mistet passordet ditt?
Meny
Oulie-Hansen AS Oulie-Hansen AS
  • Butikk
  • Håndverktøy
  • Spennverktøy
  • Skjærverktøy
  • Kampanjer
  • Aktuelt
  • Aluca bilinnredning
Hjem › Butikk › Skjærverktøy › Core drills program › Core drills › Core drills Tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks
Ruko

Core drills Tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks


Ø 19,0 mm. Cutting depth: 30 mm – Can be used on all track drilling machines. The cutting geometry has been specially optimized for heavy duty chip removal from railway tracks, thus makes efficient use possible.
Advantages of the Tecrona coating
The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C.
The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.
Applications:
Particularly for rail tracks, Hardox / Weldox steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.

Tekniske data:

Kode R1081519C
EAN-kode 4007140315519
Artikkel nr. 1081519C
Diameter 19,0 mm
Core drills Core drills cut up to ten times faster than twist drills. Core drills only cut the width of the teeth. The core is ejected. Lower energy requirements and less wear result in a longer working life.
Twist drills Twist drills have to machine the entire diameter of the hole. This calls for considerfromle downward pressure and high driving power.
Packing unit 1 pcs
Weight 0,090 kg
Cutting edges Tungsten carbide + Tecrona coating
Cutting depth 30 mm
Adapter Weldon shank (3/4") 19 mm
Machine no. RS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -
Cutting direction Right-hand cutting

Forespørsel: Core drills Tecrona coated with tungsten-carbide cutting edges and Weldon shank for railway tracks

Hidden

Du kan også ringe oss på telefon 22 75 38 00.

Dette feltet er for valideringsformål og skal stå uendret.
ProduktDiameterPacking unitWeightCutting edgesCutting depthAdapterMachine no.Cutting directionLagerPrisKjøp
R1081519C19,0 mm1 pcs0,090 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081520C20,0 mm1 pcs0,090 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081521C21,0 mm1 pcs0,090 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081522C22,0 mm1 pcs0,090 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081523C23,0 mm1 pcs0,090 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081524C24,0 mm1 pcs0,090 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081525C25,0 mm1 pcs0,100 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R10815265C26,5 mm1 pcs0,100 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081526C26,0 mm1 pcs0,100 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R10815275C27,5 mm1 pcs0,100 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081527C27,0 mm1 pcs0,100 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081528C28,0 mm1 pcs0,110 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081529C29,0 mm1 pcs0,110 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081530C30,0 mm1 pcs0,110 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081531C31,0 mm1 pcs0,120 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081532C32,0 mm1 pcs0,120 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081533C33,0 mm1 pcs0,120 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081534C34,0 mm1 pcs0,120 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser
R1081536C36,0 mm1 pcs0,120 kgTungsten carbide + Tecrona coating30 mmWeldon shank (3/4") 19 mmRS5e / RS10 / A10 / RS25e / RS40e / RS125e / RS126e / RS140e -Right-hand cuttingLogg inn for å se priser

Relaterte produkter

Hurtigvisning
Close

T-shank style jig-saw blade 8018 HCS

Logg inn for å se priser
Hurtigvisning
Close

High performance cutting oil

Logg inn for å se priser
Hurtigvisning
Close

Machine tap M DIN 376 HSS Co 5

Logg inn for å se priser
Hurtigvisning
Close

Tube and sheet drill HSS-TiN, ground with split point

Logg inn for å se priser
Hurtigvisning
Close

Tube and sheet drill HSSE Co 5, ground with split point

Logg inn for å se priser
Hurtigvisning
Close

Machine tap M DIN 371 HSS Co 5-VAP

Logg inn for å se priser

Rask levering
1-3 virkedager

Lang erfaring
Vi har lang erfaring i bransjen og kan gi deg gode råd
Fokus på kvalitet
Vi leverer verktøy fra produsenter hvor kun det beste er godt nok
Oulie-Hansen - til forsiden

Kontakt oss

Ravnåsveien 3
1254 Oslo

Telefon: 22 75 38 00

Epost: firmapost@oulie-hansen.no

Sosiale medier

Vises ikke brukes for å kopiere kode til ovenstående

Personvern og informasjonskapsler
Levert av: CoreTrek AS | CMS: Wordpress
  • Butikk
  • Håndverktøy
  • Spennverktøy
  • Skjærverktøy
  • Kampanjer
  • Aktuelt
  • Aluca bilinnredning
Handlekurv
lukk