Machine tap M DIN 376 HSS-TiN M 14
metric DIN ISO 13 – Machine taps with overflow shank and 35° right-hand spiral flutes for bottoming. The machine tap consists of heavy-duty high-speed steel with a titanium nitride coating. For universal use on a wide range of materials due to layer of hard material! For bottoming threads in unalloyed and alloyed steels up to a strength of 1000 N/mm², stainless steel. The thread is cut in one operation. Note: cutting speeds from 10 m/min. By the TiN wear-resistant coating, the surface hardness increases to about 2500 HV. Titanium nitride is a chemical compound of the two elements, titanium and nitrogen. TiN is a metallic hard material with a typical golden yellow colour. Advantages:
Increased hardness, low friction coefficient, more service life. Cooling is not necessary, but recommended.
Tekniske data:
| Kode | R233120T |
|---|---|
| EAN-kode | 4007140097569 |
| Artikkel nr. | 233120T |
| Nominal thread size | M 12 |
| Packing unit | 1 pcs |
| Weight | 0,058 kg |
| Chamfer | Type C / 35° RSP, ca. 2 - 3 threads |
| Thread | Metric DIN ISO 13 |
| Flanks | Relief ground |
| Tolerance | ISO 2 / 6H |
| Surface | TiN coated |
| Cutting direction | Right hand cutting |
| Thread angle | 60 ° |
"(Påkrevd)" indicates required fields
| Produkt | Nominal thread size | Packing unit | Weight | Chamfer | Thread | Flanks | Tolerance | Surface | Cutting direction | Thread angle | Lager | Pris | Kjøp |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| R233120T | M 12 | 1 pcs | 0,058 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | 0 | Logg inn for å se priser | |
| R233140T | M 14 | 1 pcs | 0,082 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R233160T | M 16 | 1 pcs | 0,094 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R233180T | M 18 | 1 pcs | 0,135 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R233200T | M 20 | 1 pcs | 0,195 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R233220T | M 22 | 1 pcs | 0,255 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R233240T | M 24 | 1 pcs | 0,315 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R233270T | M 27 | 1 pcs | 0,375 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser | ||
| R233300T | M 30 | 1 pcs | 0,515 kg | Type C / 35° RSP, ca. 2 - 3 threads | Metric DIN ISO 13 | Relief ground | ISO 2 / 6H | TiN coated | Right hand cutting | 60 ° | Logg inn for å se priser |
